xSPINE – GLINK Upgrade
CHOOSE PACKAGE AND SPRINGS:
Min: pick one spring
Med: pick two springs
Max: pick all springs
Price range: 2,847.00 € through 4,008.00 €
xSPINE → GLINK Upgrade
ALREADY OWN AN xSPINE?
xSPINE → GLINK Upgrade
The GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support.
With the largest boom range on the market, the GLINK is capable of reaching an incredible height of 110cm and delivers the smoothest lateral panning across the body, giving the operator true freedom of movement.
The GLINK can support all professional gimbal payloads with a lift range between 6 – 24.9kg (13 – 55.0lbs). The GLINK stabilization arms can be tuned via the GLINK spring cores so that the arms float in a close to horizontal position, with very little lift or resistance.
The GLINK is a professional gimbal operating system for those who look for the highest quality in stabilization and back support.
With the largest boom range on the market, the GLINK is capable of reaching an incredible height of 110cm and delivers the smoothest lateral panning across the body, giving the operator true freedom of movement.
The GLINK can support all professional gimbal payloads with a lift range between 6 – 24.9kg (13 – 55.0lbs). The GLINK stabilization arms can be tuned via the GLINK spring cores so that the arms float in a close to horizontal position, with very little lift or resistance.
The GLINK can accommodate most popular electronic gimbals, such as the Freefly systems and the DJI Ronin 2, which can all be mounted directly to the GLINK over-slung or under-slung.
The GLINK can also support electronic heads such as the ARRI Trinity, Betz Wave, and MK-V Omega. It can also support fixed camera rigs in handheld mode with a separate telescopic handheld unit mount.
The GLINK comes with a docking station* that allows you to balance both your camera and gimbal in the system for effortless tilt motion and perfect balance.
* The docking station is not included in the GLINK Mini kit
The arm posts can be adjusted for height and, depending on connection, either connect for high (over slung) or low mode (under slung) operation.
Both gimbal handles at each side can be adjusted tool-less on the top ring to allow perfect tilting balance of your camera and gimbal.
The MoVI/R2 mount allows for further dovetail plate balancing, allowing the operator to shift the fore and aft placement of the gimbal for precise 100% tilting balance.
Monitors, batteries and other accessories can be mounted via either the monitor clamps and/or the CF Ring foot, all around the CF Ring at any desired position.
All those features allow for a close to perfectly balanced system that requires very little effort to control, and lets the operator concentrate on the shot.
Introducing the GLINK Spring Cores
The GLINK ships with a selection of one to four pairs of our polymer spring cores, depending on the package. Each spring core has a smooth and linear lifting capacity.
They perform their best when being used near their maximum weight capacity. Because of this, each spring core has a weight range of about 5 kg / 11 lbs, allowing the operator to fine-tune the GLINK to optimal performance.
- Orange: 6.0-11.0 kg – 13.0-24.0 lbs
- Black: 10.0-15.5 kg – 22.0-34.0 lbs
- Grey: 12.5-18.5 kg – 27.5-40.5 lbs
- Blue: 18.0-24.9 kg – 39.6-55.0 lbs
The GLINK spring cores have tool-less knobs to fine tune the tension.
1. Minimal
All the neccesary gear to get started- GLINK arms
- Full carbon fiber ring
- 1 x Spring core set
- 2 x CF ring feet
2. Medium
For the creative enthusiast- GLINK arms
- Top part carbon fiber ring
- 2 x Spring core sets
- GLINK case
- Docking station
3. Max
For the professional who wants it all- GLINK arms
- Full carbon fiber ring
- 3 x Carbon fiber ring feet
- 4 x Spring core sets
- GLINK case
- Docking station
- 2 x Monitor bracket
- xSPINE babypin mount
Specifications:
| Weight | 23 kg |
|---|---|
| Dimensions | 68 × 53 × 38 cm |
In the box:
GLINK MAX
x1 Glink Pelican Air Flight Case with custom foam
x1 Socket Block
x2 Retraction Brackets
x2 Isolation Arms and Arm Posts
x1 Carbon Fiber Full Ring (top and bottom)
x1 Docking Station
x3 CF Ring Feet
x2 Monitor Clamps for CF Ring
x1 Dovetail Tuner
x2 Tool Clip-On
x1 xSPINE Baby Pin
x2 Blue Spring Cores
x2 Grey Spring Cores
x2 Black Spring Cores
x2 Orange Spring Cores
Tools: x1 bag with spare parts/screws, x1 allen key 5x150mm, x1 M4 hex wrench, x2 rip tie black, x1 303 Aero Space spring core protection.
GLINK MEDIUM
Two pairs of spring cores of the customer’s choosing are included.
1 x Glink Pelican Air Flight Case with custom foam
x1 Socket Block
x2 Retraction Brackets
x2 Isolation Arms and Arm Posts
x1 Carbon Fiber Half Ring (top)
x1 Docking Station
x1 Dovetail Tuner
Tools: x1 bag with spare parts/screws, x1 allen key 5x150mm, x1 M4 hex wrench, x2 rip tie black, x1 303 Aero Space spring core protection.
GLINK MINIMAL
One pair of spring cores of the customer’s choosing are included. Glink Minimal packs in shipping box, no pelican case.
x1 Socket Block
x2 Retraction Brackets
x2 Isolation Arms and Arm Posts
x1 Carbon Fiber Full Ring (top and bottom)
x3 CF Ring Feet
Tools: x1 bag with spare parts/screws, x1 allen key 5x150mm, x1 M4 hex wrench, x2 rip tie black, x1 303 Aero Space spring core protection.